CT-536+ 4-Port Wireless ADSL2+ Router User’s Manual Version A1.7, October 27, 2006 261056-024. Copyright Copyright© 2006 Comtrend Corporation. All rights reserved. The information and messages contained herein. How to load new firmware onto your router (Comtrend / CT-5361) (RouterCheck Support helps to solve your common router problems).

Author Message johnnyman DD-WRT Novice Joined: 20 Jul 2010 Posts: 3 Posted: Tue Jul 20, 2010 10:35 Post subject: Comtrend 536+ I have a Comtrend router, model CT-5361 (Wireless ADSL2+Router). I don't need the ADSL connection. I need only LAN and Wireless. Please, can you tell me if it is compatible with dd-wrt firmware?

Sponsor Phonism DD-WRT User Joined: 27 Sep 2008 Posts: 449 Location: Norway Posted: Tue Jul 20, 2010 11:55 Post subject: Try this link and follow the instructions. That way you can find out if it has a chipset that is supported or not. _________________ Asus RT-AC66U DD-WRT v24-sp2 giga - build 25015 [Main] Linksys E3000 DD-WRT v24-sp2 mega - build 15962 [Backup] Linksys WRT600N v1.1 DD-WRT v24-sp2 (08/12/10) mega - build 14929 [Retired] Linksys WRT54GS v4 DD-WRT v24-sp2 mini - build 15747 [Retired] johnnyman DD-WRT Novice Joined: 20 Jul 2010 Posts: 3 Posted: Tue Jul 20, 2010 13:15 Post subject: is based on Broadcom 6348 chipset.

• CT-5072T ADSL2+ Ethernet Router User Manual Version A2.0, January 26, 2010 261095-008. • Copyright Copyright© 2010 Comtrend Corporation. All rights reserved. The information contained herein is proprietary to Comtrend Corporation. No part of this document may be translated, transcribed, reproduced, in any form, or by any means without prior written consent of Comtrend Corporation. • Table of Contents CHAPTER 1 INTRODUCTION...4 1.1 F...4 EATURES 1.2 A...4 PPLICATION IAGRAM CHAPTER 2 INSTALLATION...5 2.1 H....

5 ARDWARE ETUP 2.2 LED I...6 NDICATORS CHAPTER 3 WEB USER INTERFACE...7 3.1 D... • 6.10.2 Trusted CA...60 CHAPTER 7 DIAGNOSTICS...61 CHAPTER 8 MANAGEMENT...62 8.1 S....62 ETTINGS 8.1.1 Backup Settings... 62 8.1.2 Update Settings... 62 8.1.3 Restore Default... 63 8.2 S...64 YSTEM 8.3 SNMP A...

Broadwave 1.27 Keygen on this page. • Chapter 1 Introduction The CT-5072T (TR-069 compliant) ADSL2+ Ethernet Router provides one 10/100 Ethernet port and one ADSL port for Internet access. It features TR-068 compliant panels for easy setup and use. It supports LAN applications, such as Video on Demand, over a regular telephone line at speeds of up to 24 Mbps. • 2.2 LED Indicators for details). NOTE: If pressed down for more than 20 seconds, the CT-5072T will go into a firmware update state (CFE boot mode).

The firmware can then be updated using an Internet browser pointed to the default IP address. • 2.2 LED Indicators The front panel LED indicators are shown below and explained in the following table. This information can be used to check the status of the device and its connections. Color Mode Function An Ethernet Link is established. Green An Ethernet Link is not established.

• Chapter 3 Web User Interface This section describes how to access the device via the web user interface (WUI) using an Internet browser such as Internet Explorer (version 5.0 and later). 3.1 Default Settings The factory default settings of this device are summarized below. • 3.2 IP Configuration DHCP MODE When the CT-5072T powers up, the onboard DHCP server will switch on. Basically, the DHCP server issues and reserves IP addresses for LAN devices, such as your PC. To obtain an IP address from the DCHP server, follow the steps provided below. • STATIC IP MODE In static IP mode, you assign IP settings to your PC manually.

Follow these steps to configure your PC IP address to use subnet 192.168.1.x. NOTE: The following procedure assumes you are running Windows XP. However, the general steps involved are similar for most operating systems (OS).

• 3.3 Login Procedure Perform the following steps to login to the web user interface. NOTE: The default settings can be found in section 3.1. STEP 1: Start the Internet browser and enter the default IP address for the device in the Web address field. For example, if the default IP address is 192.168.1.1, type • It allows for the configuration of connection settings.

4.1 Auto Quick Setup This function provides an automated process to quickly setup a WAN connection. The CT-5072T will auto-select the best available PVC profile, provided the ADSL link is up (see section 2.2).

• 4.2 Manual Quick Setup To setup the WAN connection manually, follow these instructions: STEP 1: Un-tick the DSL Auto-connect checkbox  on the Quick Setup screen. Un-tick this checkbox to begin manual setup and display the following screen. STEP 2: Adjust the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) settings for the connection you wish to establish. • Click Next to continue NOTE: The subsections that follow continue the ATM PVC setup procedure.

Enter the appropriate settings for your service. Choosing different connection types will lead to a different sequence of setup screens. 4.2.1 PPP over ATM (PPPoA) and PPP over Ethernet (PPPoE) STEP 4: Enter the PPP settings as provided by your ISP. • DIAL ON DEMAND The CT-5072T can be configured to disconnect if there is no activity for a period of time by selecting the Dial on demand checkbox . You must also enter an inactivity timeout period in the range of 1 to 4320 minutes.